Industrial electrical enclosure manufacturing
Floor Mount Electrical Enclosures with Reinforced Base Anchoring
A stable, reinforced base for variable frequency drives, motor starters, and other heavy process equipment. Designed to anchor directly to the floor, level on uneven surfaces, and withstand vibration and accidental impacts.
- Reinforced corner plates with pre-drilled anchor bolt holes
- Adjustable leveling legs and internal cross-bracing
- In-house fabrication, welding, finishing, and dimensional QA
30 mm
Leveling adjustment
M12–M16
Anchor hole options
Built for direct floor installation
A base engineered for heavy equipment
The enclosure base is designed to stay fixed under vibration from drives, motor starters, and nearby process machinery. Reinforced corners, adjustable supports, and internal bracing work together to create a rigid mounting foundation without external protrusions.
Reinforced anchor corners
A 3–6 mm carbon or stainless steel bottom panel uses welded corner gussets. M12–M16 clearance holes sit 50–100 mm from the edges for anchoring into concrete.
Adjustable leveling support
Leveling legs thread into welded nuts at four corners and two mid-side points, providing up to 30 mm of height adjustment after placement.
Internal rigidity, no external projections
Cross members connect the base to the side walls to increase torsional stiffness. Added bracing helps limit deflection under 5 g vibration loads typical near large motors and helps resist side impacts and floor movement.
One-site production
A controlled process from sheet to finished enclosure
All operations run at one site, reducing vendor-to-vendor transport and keeping dimensional checks within a single QA loop.
| Processing category | Equipment and specifications | Capacity | Capabilities |
|---|---|---|---|
| Precision laser cutting | 12 kW and 6 kW fiber laser sources | 3 units | High-speed, burr-free profiling of carbon steel, stainless steel, and aluminum sheets. |
| CNC press brake bending | OG35 (2), OG100 (2), OG200 (1) | 5 units | 35 t to 200 t capacity for complex bends, compact chassis, and heavy structural enclosures. |
| Precision and structural welding | 2 kW handheld laser, MIG, TIG, and cold welding | 24 units | Low-heat-input laser welding, sanitary TIG for stainless steel, and structural full-penetration MIG. |
| Coating and protective finishing | 2500 × 6000 mm powder coating and curing line | 1 complete line | In-house pretreatment, powder coating, and thermal curing for oversized enclosures and frames. |
Automated clinching installs PEM hardware before structural seams are welded using handheld laser or MIG processes.
Specify for the installation environment
Material and finish options
Choose the material and protective finish to suit the enclosure location, exposure, and service requirements.
Standard mild steel
Standard builds use 2 mm or 3 mm mild steel with a zinc-rich primer and polyester powder topcoat. Powder coating after welding creates a continuous film that resists chipping from forklift traffic.
Stainless steel for coastal or wash-down areas
Select 304 or 316 stainless steel, formed and passivated before coating, or specify a #4 brushed finish.
Keep installation features functional
Anchor holes and leg threads are kept clear of coating buildup to support consistent installation torque values.
Application fit
A stable platform for industrial equipment
Battery energy storage cabinets, outdoor switchgear, CNC machine guards, and variable frequency drive cabinets can all require dependable floor mounting.
- Anchor directly to concrete using chemical anchors or expansion bolts.
- Compensate for uneven plant floors with adjustable leveling legs.
- Support heavy machinery with added base bracing and torsional stiffness.
Quality and traceability
Checks at every stage
Six QA staff verify materials, fabrication, and finished assemblies. Batch records remain linked for traceability on annual supply contracts.
- 01 / Incoming
Material verification
- 02 / Forming
First-article inspection on the bending program
- 03 / Welding
Weld penetration samples
- 04 / Final assembly
100% dimensional checks against the 3D model
- 05 / Finish and shipment
Coating thickness and adhesion testing before crating
Request a quote
Share your enclosure requirements
Send your 3D model or 2D drawings, required IP rating, overall dimensions, and any special base anchoring details. Include expected annual volume so production can be aligned with your installation timeline.
Email: info@enclosuremfg.com
Enclosuremfg is located at Building 4, Kuiqing Road, Qingxi Town, Dongguan City, Guangdong Province.